# text: "Each Help Panel has a row of buttons, like the ones you see below."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=62 x2=490 y2=175
# text: " • The Done button terminates the Help… dialog;\n\n • The Next button takes you to the next Help Panel in sequence;\n\n • The Prev button takes you to the previous panel in sequence; and\n\n • the Index button takes you to the main Index panel."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=182 x2=490 y2=248
# text: "Many Help Panels have key words that you may click to navigate to a particular topic. HyperSwitch keeps track as you do that. You can go back to the previous such panel by holding the option key down while you click on the Prev button."
DITL_27002.txt
# 14 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=208 y2=20
# text: "About Help Panels (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "Many Help panels describe dialogs, and they generally offer a pop-up menu from which you can select a dialog to: 1) exit Help, 2) work with the specific dialog, and 3) return to the same Help Panel. The smile face"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=137
# text: "will always be located in the upper-right corner of panels that offer this feature. Although all menu items will be available for you to select, only certain items will be active."
# text: "HyperSwitch has many features to make using your Macintosh a bit easier. The most useful ones are described in the following paragraphs."
# item 11: TEXT (0x88) disabled
# bounds: x1=10 y1=84 x2=30 y2=99
# text: "•"
# item 12: TEXT (0x88) disabled
# bounds: x1=40 y1=84 x2=491 y2=134
# text: "All features are available when running in a multi-application environment (i.e. with MultiFinder or Switcher). Some features are not applicable when running in a single-application environment."
# item 13: TEXT (0x88) disabled
# bounds: x1=40 y1=144 x2=489 y2=178
# text: "Provides a pop-up menu listing all currently open applications. You may use this menu to switch between applications."
# item 14: TEXT (0x88) disabled
# bounds: x1=10 y1=144 x2=30 y2=159
# text: "•"
# item 15: TEXT (0x88) disabled
# bounds: x1=41 y1=188 x2=492 y2=237
# text: "Automatically lists, in a pop-up menu, all applications residing on your system\'s hard drives. You may launch any such application by menu selection and, optionally, attach up to 15 documents."
# item 16: TEXT (0x88) disabled
# bounds: x1=10 y1=188 x2=30 y2=203
# text: "•"
DITL_27004.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=182 y2=20
# text: "Key Features (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=10 y1=40 x2=30 y2=55
# text: "•"
# item 11: TEXT (0x88) disabled
# bounds: x1=40 y1=40 x2=490 y2=106
# text: "Provides a pop-up menu listing the names of all open windows in all open applications and desk accessories. Selecting a window from this menu causes HyperSwitch to make that the active window; automatically switching to the appropriate application or"
# item 12: TEXT (0x88) disabled
# bounds: x1=40 y1=105 x2=490 y2=122
# text: "DA when necessary."
# item 13: TEXT (0x88) disabled
# bounds: x1=40 y1=132 x2=491 y2=182
# text: "Provides the ability to create launch sets; each set consisting of an application and any number of documents to be launched with that application (subject to available memory). Once created, sets may"
# item 14: TEXT (0x88) disabled
# bounds: x1=10 y1=132 x2=30 y2=147
# text: "•"
# item 15: TEXT (0x88) disabled
# bounds: x1=40 y1=181 x2=490 y2=231
# text: "be launched by selecting them from a pop-up menu. Sets may also be combined, which enables the launch of multiple applications (each with multiple documents) from a single menu selection."
DITL_27005.txt
# 18 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=182 y2=20
# text: "Key Features (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=10 y1=40 x2=30 y2=55
# text: "•"
# item 11: TEXT (0x88) disabled
# bounds: x1=40 y1=40 x2=490 y2=90
# text: "Provides an alternative Open dialog, which enables the selection of up to 15 documents during a single dialog. The documents may be chosen from multiple folders and/or disk drives."
# item 12: TEXT (0x88) disabled
# bounds: x1=10 y1=100 x2=30 y2=115
# text: "•"
# item 13: TEXT (0x88) disabled
# bounds: x1=40 y1=100 x2=490 y2=134
# text: "When using MultiFinder, provides the ability to quit the Finder and release the memory it occupies."
# item 14: TEXT (0x88) disabled
# bounds: x1=10 y1=144 x2=30 y2=159
# text: "•"
# item 15: TEXT (0x88) disabled
# bounds: x1=40 y1=144 x2=490 y2=178
# text: "When using MultiFinder or Switcher, enables toggling between two applications via user-defined keystrokes."
# text: "General Information - Minimum Configuration"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=104
# text: "HyperSwitch is designed to operate on the Macintosh Plus and all later versions of Macintosh hardware currently available. A hard disk is highly recommended. HyperSwitch does not function with the 64K ROM used on earlier hardware."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=114 x2=490 y2=164
# text: "HyperSwitch requires System Software version 4.1 or later. HyperSwitch is compatible with MultiFinder versions through 6.1b9 and Switcher versions through 5.1. HyperSwitch‚Ñ¢ 1.1 is compatible with System 7."
# text: "General Information - Operating Environments"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=105
# text: "HyperSwitch is intended for use in a multi-application environment, such as that provided by MultiFinder and Switcher. With environments that permit only one application to be open at a time, some HyperSwitch functions are not applicable, as noted below:"
# item 11: TEXT (0x88) disabled
# bounds: x1=10 y1=115 x2=30 y2=130
# text: "•"
# item 12: TEXT (0x88) disabled
# bounds: x1=40 y1=115 x2=490 y2=164
# text: "Switching between applications. Since only one application may be open at a time, it is not possible for HyperSwitch to switch to another open application."
# item 13: TEXT (0x88) disabled
# bounds: x1=10 y1=174 x2=30 y2=189
# text: "•"
# item 14: TEXT (0x88) disabled
# bounds: x1=40 y1=174 x2=490 y2=237
# text: "Launching combined sets or launching an application without quitting the current application. HyperSwitch cannot create a multi-application environment. That\'s the purpose of software like MultiFinder and Switcher."
DITL_27009.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=400 y2=20
# text: "General Information - Operating Environments (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=10 y1=40 x2=30 y2=55
# text: "•"
# item 11: TEXT (0x88) disabled
# bounds: x1=40 y1=40 x2=490 y2=90
# text: "Quit/Launch Finder. These items are omitted from the HyperSwitch menu when operating in a single-application environment, for two reasons: 1) because quitting Finder without launching another"
# item 12: TEXT (0x88) disabled
# bounds: x1=40 y1=89 x2=490 y2=123
# text: "application would only result in its being re-loaded; and 2) because launching Finder is as simple as quitting the current application."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=133 x2=490 y2=183
# text: "If you still use Switcher, you\'ll like what HyperSwitch does for you. All functions are available, and any action you request of HyperSwitch which would result in quitting Switcher (e.g. launch MultiFinder, restart your"
# text: "General Information - About HyperSwitch‚Ñ¢"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "HyperSwitch is a utility program that loads into your computer\'s memory when you power-on or restart your system. This type of program is also called an INIT, because it\'s activated during your system\'s initialization"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=137
# text: "process. An INIT is generally very active, intercepting and interpreting various system events to determine whether it should execute one of its functions."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=147 x2=490 y2=197
# text: "HyperSwitch creates a file called \"HyperSwitch‚Ñ¢ Preferences\" and places it in the Preferences Folder within your System Folder. It only does this during system start-up, and then only if the file doesn\'t exist. (It will"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=196 x2=491 y2=245
# text: "also create the Preferences Folder, if one doesn\'t exist.) HyperSwitch updates its Preferences file whenever you customize User Options or make changes to the Applications Menu or the Sets Menu. "
DITL_27011.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=378 y2=21
# text: "General Information - About HyperSwitch‚Ñ¢ (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=421 y2=91
# text: "During system start-up, if HyperSwitch encounters a problem that prevents it from loading successfully, it displays the icon shown at the right, rather than its standard icon. As a general"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=155
# text: "rule, this should only occur if your system configuration is not compatible with HyperSwitch, as described in the section \"Minimum Configuration.\" It can also occur when HyperSwitch encounters problems with disk I/O or memory allocation."
# item 12: PICTURE (0xC0) disabled
# bounds: x1=442 y1=48 x2=466 y2=79
# PICT resource ID: 8750
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=163 x2=490 y2=197
# text: "You may prevent HyperSwitch from loading itself into memory by holding down the shift key during your system\'s start-up process."
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=206 x2=490 y2=240
# text: "HyperSwitch generally takes very little time to load itself into memory. It can take considerably longer when it has to create its Preferences file."
DITL_27012.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=378 y2=21
# text: "General Information - About HyperSwitch‚Ñ¢ (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=491 y2=90
# text: "This is because HyperSwitch will locate all applications on your system\'s disk drives and build its initial Applications Menu with the names of those applications. HyperSwitch will do this for non-removable disks only."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=149
# text: "File servers and other network drives will be included in this process, but only if your network software becomes active before HyperSwitch. You may select the menu item \"Edit Applications Menu…\" to re-create your"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=148 x2=491 y2=213
# text: "Applications Menu at any time after system startup. This will ensure that applications from network drives are included in that menu. You may review the Help Panel that describes this function by clicking on the following phrase."
# item 13: TEXT (0x08) enabled
# bounds: x1=132 y1=221 x2=365 y2=238
# text: "Review \"Edit Applications Menu…\""
# item 14: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27029"
DITL_27013.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "2"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=378 y2=21
# text: "General Information - About HyperSwitch‚Ñ¢ (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=493 y2=105
# text: "If you\'re using a version of System Software earlier than version 6.0, please review the section titled \"Beeps and Messages,\" which is selectable from the Index Panel. You may also review it by clicking the phrase, below."
# text: "Proxy is a very small application that has only one purpose: to facilitate your quitting Finder when running MultiFinder. This frees up 430K with System 7; 160K for earlier versions of system software."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=165
# text: "If you don\'t intend to use this function, or if you\'ve read the precautions about quitting Finder in the section titled \"Technical Insights,\" and you can manage the issues discussed, you may remove Proxy from your System Folder and save its 24K of RAM."
# text: "HyperSwitch provides a number of features to enhance your use of the Macintosh. This section outlines the things you can do to make the most of those features. If you prefer to try a feature without reviewing its"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=139
# text: "associated Help Panel, you may do so by selecting the indicated menu item from the icon in the top right corner of each panel. You may review the help text about a feature by clicking on its \"review\" phrase. You can"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=138 x2=490 y2=169
# text: "return from each review by holding the option key while you click the Prev button."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=178 x2=490 y2=226
# text: "First, decide whether you like the location of the HyperSwitch icon in your menu bar. If you do, go to the next paragraph. If not, click the following phrase to learn how to re-position the icon."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 15: TEXT (0x08) enabled
# bounds: x1=152 y1=233 x2=343 y2=249
# text: "Review \"Move Menu Icon…\""
# item 16: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27034"
DITL_27016.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=195 y2=21
# text: "Getting Started (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "Next, you\'ll want to customize your Applications Menu. It probably shows applications that you seldom use and some that you don\'t launch directly. You may also have multiple versions of the same application,"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=139
# text: "and HyperSwitch may not be showing the version you want to launch. Or you might have network software that loads after HyperSwitch, and applications on network disks are not in the Applications Menu. In any"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=138 x2=490 y2=172
# text: "event, if you\'d like to make some changes to your Applications Menu, click on the following phrase to learn how that\'s done."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=199 x2=490 y2=249
# text: "Next, you\'ll want to create launch sets. The name of each set you create will appear in your Sets Menu. A set consists of an application you want to launch along with any number of documents or files you want to open."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 15: TEXT (0x08) enabled
# bounds: x1=129 y1=176 x2=361 y2=193
# text: "Review \"Edit Applications Menu…\""
# item 16: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27029"
DITL_27017.txt
# 20 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "3"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=195 y2=21
# text: "Getting Started (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=89
# text: "You may also combine sets to launch several applications with one menu selection. If you\'d like to learn how sets are created, click on the following phrase."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=111 x2=490 y2=160
# text: "HyperSwitch provides a number of shortcuts for invoking various of its functions. This is done via keyboard and key/click combinations that you may customize. You should at least review these Help Panels to find out"
# text: "This menu consists of two sections: the top section lists applications that are currently in memory while the bottom section lists applications that you may launch. Under MultiFinder, if you\'ve launched a desk accessory"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=123
# text: "without holding down the option key, the name of that DA will also be listed in the top section of this menu."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=132 x2=490 y2=182
# text: "Selecting an application (or DA) from the top section causes HyperSwitch to bring that application frontmost, making it the active application. The frontmost application is identified by a checkmark (‚áß) in this menu. The"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=181 x2=490 y2=231
# text: "application that was previously frontmost is identified by a bullet (•). You may toggle between these two applications by holding the command (⌘) and shift keys while pressing the letter \"A\" on your keyboard."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27020.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=213 y2=20
# text: "Applications Menu (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "Selecting an application from the bottom section causes HyperSwitch to launch that application. If you\'re running in a single-application environment (i.e. without MultiFinder or Switcher), HyperSwitch will quit"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=107
# text: "the current application before launching the one you selected."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=116 x2=490 y2=166
# text: "Holding the option key while selecting an application from the bottom section causes HyperSwitch to display a launch dialog which is opened at the folder containing the selected application. This dialog will show only"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=165 x2=490 y2=215
# text: "documents that were created by that application. You may attach up to 15 such documents prior to launch. If you\'d like to learn more about the use of this dialog, click on the following phrase."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 15: TEXT (0x08) enabled
# bounds: x1=145 y1=222 x2=345 y2=240
# text: "Review \"Launch/Open Dialog\""
# item 16: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27069"
DITL_27021.txt
# 18 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=213 y2=20
# text: "Applications Menu (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "If the application you\'ve selected from the bottom section is currently in memory, HyperSwitch will make it frontmost rather than launching it again. If you\'ve requested a launch dialog and have attached documents,"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=489 y2=123
# text: "HyperSwitch will cause the application to open those documents after making it frontmost."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=131 x2=490 y2=181
# text: "Whenever you launch an application, HyperSwitch checks to see if its name appears in the bottom section of this menu. If it does not, and you haven\'t told HyperSwitch to omit the application, it will be added to this"
# text: "This menu shows the names of windows in all open applications (or DAs). It groups windows by application, listing the frontmost application first. Each application\'s windows are listed in order, front to back. Selecting a"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=123
# text: "window from this menu causes HyperSwitch to make that the frontmost window; activating its associated application (or DA), if necessary."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=136 x2=490 y2=186
# text: "The frontmost window is identified by a checkmark (⇧) in this menu. If the frontmost application has more than one window listed, its second window is identified by a bullet (•). You may toggle between these two"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=185 x2=490 y2=219
# text: "windows by holding the command (‚åò) and shift keys while pressing the letter \"W\" on your keyboard."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27023.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=193 y2=20
# text: "Windows Menu (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "HyperSwitch only lists certain kinds of windows in this menu. You may influence its choice of windows, somewhat, by toggling the menu items \"Show Standard Windows\" and \"Show More Windows.\" If you\'d like an"
# text: "This menu shows the names of all sets that you\'ve created. Combined sets are prefixed with an asterisk (*). Selecting a set from this menu causes HyperSwitch to launch the application(s) associated with that set."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=102 x2=490 y2=168
# text: "Holding down the option key while selecting a set causes HyperSwitch to display a Save Sets… dialog showing the contents of that set. After you\'ve terminated that dialog, HyperSwitch will launch the last set to appear in the \"Set Name\" text area."
# text: "This panel describes the DAs Menu, which applies to System versions 4.1 thru 6.0.x. The Apples Menu for System 7 is described on the next panel."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=81 x2=490 y2=131
# text: "This menu shows the names of all available desk accessories. It is included in the HyperSwitch menu for convenience only. Selecting a DA from this menu causes HyperSwitch to open that DA."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=138 x2=490 y2=188
# text: "HyperSwitch creates this menu when you power-on or restart your Macintosh. If you add or remove DAs from your system, you can advise HyperSwitch to update its DAs Menu. You do this by selecting \"Refresh"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=187 x2=490 y2=221
# text: "DAs Menu\" from the Options Menu. If you\'d like to know more about this feature, click on the following phrase."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 15: TEXT (0x08) enabled
# bounds: x1=153 y1=227 x2=340 y2=242
# text: "Review \"Refresh DAs Menu\""
# item 16: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27027"
DITL_27026.txt
# 32 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27121"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "10"
# item 9: TEXT (0x88) disabled
# bounds: x1=200 y1=3 x2=293 y2=20
# text: "Options Menu"
# item 10: TEXT (0x88) disabled
# bounds: x1=10 y1=224 x2=181 y2=242
# text: "*Click on any menu item"
# item 11: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 12: TEXT (0x08) enabled
# bounds: x1=50 y1=52 x2=220 y2=69
# text: "Refresh DAs/Apples Menu"
# item 13: TEXT (0x08) enabled
# bounds: x1=50 y1=84 x2=215 y2=101
# text: "Show Standard Windows"
# item 14: TEXT (0x08) enabled
# bounds: x1=50 y1=118 x2=190 y2=135
# text: "Show More Windows"
# item 15: TEXT (0x08) enabled
# bounds: x1=50 y1=150 x2=217 y2=167
# text: "Edit Applications Menu…"
# item 16: TEXT (0x08) enabled
# bounds: x1=50 y1=182 x2=177 y2=199
# text: "Move Menu Icon…"
# item 17: TEXT (0x08) enabled
# bounds: x1=313 y1=52 x2=408 y2=69
# text: "Quick Clicks…"
# item 18: TEXT (0x08) enabled
# bounds: x1=313 y1=84 x2=401 y2=101
# text: "Quick Keys…"
# item 19: TEXT (0x08) enabled
# bounds: x1=313 y1=118 x2=395 y2=135
# text: "Save Sets…"
# item 20: TEXT (0x08) enabled
# bounds: x1=313 y1=150 x2=419 y2=167
# text: "Restart System"
# item 21: TEXT (0x08) enabled
# bounds: x1=313 y1=182 x2=438 y2=199
# text: "Shut Down System"
# item 22: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27027"
# item 23: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27028"
# item 24: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27028"
# item 25: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27029"
# item 26: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27034"
# item 27: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27035"
# item 28: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27038"
# item 29: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27043"
# item 30: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27067"
# item 31: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27068"
DITL_27027.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=108 y1=3 x2=382 y2=20
# text: "Options Menu - Refresh DAs/Apples Menu"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=74
# text: "The DAs Menu applies to System versions 4.1 thru 6.0.x. The Apples Menu applies to System 7."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=83 x2=490 y2=133
# text: "HyperSwitch creates either the DAs or Apples Menu when you power-on or restart your system. It does not attempt to keep track as you add or remove items from your system. If you\'ve done that, you can tell"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=132 x2=490 y2=166
# text: "HyperSwitch to update its DAs or Apples Menu by selecting this menu item. The menu will have been updated by the time you see it again."
# text: "Options Menu - Show Standard/More Windows"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "The default setting for HyperSwitch is to show what it refers to as Standard Windows in the Windows Menu. The reason for being selective about this is to prevent your asking for a window to be made frontmost"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=139
# text: "that the application never intended to have in that position. While there are legitimate reasons to override this option, you should avoid selecting windows with names you don\'t recognize (the application might hang)."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=147 x2=490 y2=197
# text: "A \"standard\" window is one that either has a box you can click to make it go away, or has a box you can click to change its size. Selecting the menu item \"Show More Windows\" simply removes these restrictions."
# text: "Options Menu - Edit Applications Menu…"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "This dialog allows you to determine which applications you want shown in the Applications Menu. HyperSwitch initially creates this menu for you, but the assumptions it makes during that process may not be suitable to"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=139
# text: "you. For example, if you have more than one occurrence of a program, HyperSwitch will \"include\" the first occurrence it encounters and \"omit\" all subsequent occurrences. (This is based entirely on file name.)"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=147 x2=490 y2=197
# text: "You may view this dialog now to see if HyperSwitch has omitted any of your programs. Take a good look at this dialog. Click \"Done\" to return here. (HyperSwitch sorts application names before it shows the dialog.)"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=205 x2=490 y2=255
# text: "An application can consist of many programs, and interchanging these terms is not accurate. When you launch an application, you\'re actually launching just one of its programs. It will call other programs as needed."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27030.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=362 y2=20
# text: "Options Menu - Edit Applications Menu… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=74
# text: "These \"called\" programs will also be listed in your Applications Menu. As a general rule, you should \"omit\" any programs you don\'t recognize."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=81 x2=490 y2=131
# text: "You can omit programs from the Applications Menu by selecting their names from the list on the left and clicking the Omit button. You can omit one program at a time by double clicking its name."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=138 x2=490 y2=188
# text: "Similarly, you can include programs in the Applications Menu by selecting their names from the list on the right and clicking the Include button. You can include one program at a time by double clicking its name. You"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=187 x2=490 y2=237
# text: "will not be allowed to \"include\" a program, if its name already appears in the Applications Menu. You must \"omit\" one before you \"include\" the other."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27031.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=361 y2=20
# text: "Options Menu - Edit Applications Menu… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=91
# text: "HyperSwitch doesn\'t attempt to keep track as you add new applications or change the names of existing ones. However, when you launch an application that isn\'t in your Applications Menu, HyperSwitch will add it"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=105
# text: "to that menu (unless it\'s one that\'s been omitted)."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=112 x2=490 y2=162
# text: "Conversely, if you\'ve deleted or re-named an application, HyperSwitch won\'t find it the next time you select it from this menu. In that instance, HyperSwitch will delete any reference to that application, then ask if you"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=161 x2=490 y2=194
# text: "want to look for it. You can use this method to omit stale references from the Applications Menu."
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=202 x2=490 y2=252
# text: "Another way to edit the Applications Menu is to have HyperSwitch go through its entire creation process. You do this by first clicking the button labeled \"Re-create Applications Menu…\" on this dialog."
# item 15: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27032.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=362 y2=20
# text: "Options Menu - Edit Applications Menu… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "For technical reasons, HyperSwitch disables this button while you\'re viewing Help Panels. Please read the remainder of this section and click \"Done\" to exit Help before attempting to re-create this menu."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=98 x2=490 y2=148
# text: "You may want to re-create the Applications Menu because you\'ve added, deleted, moved or re-named your applications. If you have access to a file server or otherwise use network software to access disk drives, you"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=147 x2=490 y2=197
# text: "may need to use this function to include applications from those drives. HyperSwitch will have included applications from all non-removable drives that were available during system start-up. However, if your"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=196 x2=490 y2=246
# text: "network software was activated after HyperSwitch, applications from those drives will not have been included. Creating the Applications Menu while your network software is active will remedy this problem."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27033.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=362 y2=20
# text: "Options Menu - Edit Applications Menu… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "After clicking the button labeled \"Re-create Applications Menu…,\" you will see a dialog that asks you to confirm your intent to do that. This function can be time-consuming; more so if you have many applications,"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=107
# text: "or if HyperSwitch will have to retrieve information across your network."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=117 x2=490 y2=182
# text: "This dialog has a checkbox labeled \"Exclude Omitted Applications.\" Leaving this box checked tells HyperSwitch to retain information about applications you have previously omitted, so they won\'t appear in this new version of the Applications Menu."
# text: "The default positioning of the HyperSwitch icon is immediately to the left of where MultiFinder displays application icons. However, you may move the HyperSwitch icon to any other position within the menu bar."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=149
# text: "You should avoid placing the HyperSwitch icon in the same place as icons from either MultiFinder or another INIT. Some programs use relative positioning of their icons to determine whether a mouse click is being"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=148 x2=490 y2=180
# text: "directed at them. You might lose the ability to invoke HyperSwitch via the menu bar."
# text: "You can invoke HyperSwitch by pointing at its icon in the menu bar and holding the mouse down to view its full menu structure. You may also invoke HyperSwitch via keyboard and key/click combinations. Key/click"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=139
# text: "combinations are described here. Please take a moment to view this dialog by selecting \"Quick Clicks…\" from the Options Menu in the upper right corner of this panel."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=148 x2=490 y2=180
# text: "The first five key/click combinations invoke the display of HyperSwitch menus. The last combination invokes an \"intelligent\" Open… dialog."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=189 x2=490 y2=239
# text: "The column of radio buttons is used to turn a key/click combination on or off. The check boxes represent the \"control\" keys which must be held down to invoke a function at the time the mouse button is pressed."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27036.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=290 y2=20
# text: "Options Menu - Quick Clicks… (Continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "For example, holding the command (‚åò) and shift keys while pressing and holding the mouse button will cause the Windows Menu to be displayed at that mouse point. "
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=100 x2=490 y2=150
# text: "You may have already implemented key/click combinations to invoke various functions of other programs. If they conflict with the default values you see in this dialog, you should change one or the other."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=158 x2=492 y2=192
# text: "HyperSwitch will not respond to these key/click combinations while a modal dialog is being shown (e.g. these Help Panels are modal dialogs)."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=201 x2=490 y2=251
# text: "The previous panel referred to an \"intelligent\" Open… dialog. This intelligence comes from having HyperSwitch interpret your intent based on where you clicked the mouse."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27037.txt
# 19 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "2"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=289 y2=20
# text: "Options Menu - Quick Clicks… (Continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "When you invoke the Open… dialog via this key/click combination, you should click on one of the frontmost application\'s windows; one that corresponds to the location and/or type of file you want to open. When"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=139
# text: "you do that, HyperSwitch will display its Open… dialog at the folder containing the file represented by that window. It will also restrict the file list to only files of that same type."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=145 x2=490 y2=195
# text: "HyperSwitch may not find a file to associate with the window you clicked. To learn what is done in such a situation, click the following phrase."
# text: "You can invoke HyperSwitch by pointing at its icon in the menu bar and holding the mouse down to view its full menu structure. You may also invoke HyperSwitch via keyboard and key/click combinations. Keyboard"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=139
# text: "combinations are described here. Please take a moment to view this dialog by selecting \"Quick Keys…\" from the Options Menu in the upper right corner of this panel."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=148 x2=490 y2=197
# text: "The column of radio buttons is used to turn a keyboard combination on or off. The check boxes represent the \"control\" keys (always command (‚åò) and shift) which must be held down in order to invoke a function when"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=196 x2=490 y2=245
# text: "its associated function key is pressed. For example, holding the shift and command (⌘) keys while pressing the letter \"O\" will cause an Open… dialog to be displayed."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27039.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=284 y2=21
# text: "Options Menu - Quick Keys… (Continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "You may have already implemented keyboard combinations to invoke various functions of other programs. If they conflict with the default values you see in this dialog, you should change one or the other."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=100 x2=490 y2=134
# text: "HyperSwitch will not respond to these keyboard combinations while a modal dialog is being shown (e.g. these Help Panels are modal dialogs)."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=145 x2=492 y2=195
# text: "The \"Target Window\" function, invoked by pressing command-shift-W, causes HyperSwitch to bring the current application\'s second window to the front and make it the active window. The previously active window"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=194 x2=490 y2=243
# text: "becomes the application\'s second window. This enables you to toggle between an aplication\'s front two windows, which can simplify cut/copy and paste operations."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27040.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=284 y2=21
# text: "Options Menu - Quick Keys… (Continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "The \"Target Application\" function, invoked by pressing command-shift-A, causes HyperSwitch to bring the \"target\" application frontmost, making it the active application. The target application is the one previously"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=123
# text: "frontmost. It is identified in the top portion of the Applications Menu by a bullet (•). You can toggle between two applications in this manner."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=135 x2=492 y2=185
# text: "The \"Launch… Dialog\" function, invoked by pressing command-shift-L, causes HyperSwitch to display a Launch dialog, which will be opened at the folder containing the frontmost (active) application. To learn how to"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=184 x2=487 y2=202
# text: "make use of this dialog, click the following phrase."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 15: TEXT (0x08) enabled
# bounds: x1=142 y1=213 x2=341 y2=231
# text: "Review \"Launch/Open Dialog\""
# item 16: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27069"
DITL_27041.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=284 y2=20
# text: "Options Menu - Quick Keys… (Continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "The \"Open… Dialog\" function, invoked by pressing command-shift-O, causes HyperSwitch to display an Open… dialog, which will be opened at the folder containing the file represented by the frontmost (active)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=107
# text: "window. Only files of the same type as that represented will be shown."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=106 x2=492 y2=156
# text: "If that window does not represent a currently-open file, or the frontmost application has no active windows, the dialog will open at the folder containing the frontmost application, and all files created by that"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=155 x2=490 y2=189
# text: "application will be shown. To learn how to make use of this dialog, click the following phrase."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 15: TEXT (0x08) enabled
# bounds: x1=143 y1=194 x2=341 y2=212
# text: "Review \"Launch/Open Dialog\""
# item 16: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27069"
DITL_27042.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=282 y2=21
# text: "Options Menu - Quick Keys… (Continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "The \"Std/More Windows\" function, invoked by pressing command-shift-S, causes HyperSwitch to toggle between showing \"Standard\" windows and showing \"More\" windows in the Windows Menu. To see a definition of"
# text: "A Set consists of an application and any number of documents or files to be opened by that application. Sets may be combined so that multiple applications (each having multiple documents) may be launched with one"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=139
# text: "menu selection. The names of all sets you create are listed in the Sets Menu. The names of combined sets are prefixed with an asterisk (*). To learn more about the Sets Menu, click the following phrase."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=166 x2=490 y2=216
# text: "The Save Sets… dialog is very busy and isn\'t particularly intuitive to use. But it does provide considerable function, and the instructional messages can be helpful. Let\'s look at the dialog now. Using the icon on this panel,"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=215 x2=490 y2=248
# text: "select \"Save Sets…\" from the Options Menu. Click \"Done\" to return to this Help Panel."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 15: TEXT (0x08) enabled
# bounds: x1=171 y1=142 x2=309 y2=158
# text: "Review \"Sets Menu\""
# item 16: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27024"
DITL_27044.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "The \"Set Name:\" text area is an important element of this dialog. If you didn\'t notice it, take another look at the dialog. Use this text area to name the sets you create. A set will not be saved unless you name it!"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=149
# text: "A set goes through 3 phases during its creation process. The Set Name text area indicates the phase a set is in. First, having no elements, it\'s an Empty Set. Next, when you add the first element - an application or"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=148 x2=489 y2=196
# text: "a combination of other sets - it becomes a New Set. The final phase occurs after you\'ve named the set, which tells HyperSwitch you want to save it in the Preferences file."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=206 x2=490 y2=256
# text: "The next panel is an index to various topics about this dialog. You may use it for quick reference to those subjects, or use the \"Next\" button to read through all of them."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27045.txt
# 22 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "5"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=10 y1=224 x2=139 y2=242
# text: "*Click on any topic"
# item 11: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 12: TEXT (0x08) enabled
# bounds: x1=150 y1=52 x2=338 y2=69
# text: "Ways to Invoke Save Sets…"
# item 13: TEXT (0x08) enabled
# bounds: x1=150 y1=84 x2=322 y2=101
# text: "Manipulating the File List"
# item 14: TEXT (0x08) enabled
# bounds: x1=150 y1=118 x2=247 y2=135
# text: "Creating a Set"
# item 15: TEXT (0x08) enabled
# bounds: x1=150 y1=150 x2=254 y2=167
# text: "Combining Sets"
# item 16: TEXT (0x08) enabled
# bounds: x1=150 y1=182 x2=273 y2=199
# text: "Button Definitions"
# item 17: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27046"
# item 18: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27049"
# item 19: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27052"
# item 20: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27054"
# item 21: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27056"
DITL_27046.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=274 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=228 y2=37
# text: "Ways to Invoke Save Sets…"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=68
# text: "There are a number of ways to invoke the Save Sets… dialog, as follows:"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=77 x2=490 y2=94
# text: " • Select Save Sets… from the Options Menu."
# item 13: TEXT (0x88) disabled
# bounds: x1=27 y1=102 x2=490 y2=152
# text: "If there are no sets listed in the Sets Menu, the dialog will open with an Empty Set. It will also open with an Empty Set if you select Save Sets… while holding the option key."
# item 14: TEXT (0x88) disabled
# bounds: x1=27 y1=162 x2=490 y2=211
# text: "Otherwise, the dialog will open with a New Set consisting of the frontmost (active) application and all of its currently open files. The files will be listed in their reverse order vis-a-vis the application\'s"
# item 15: TEXT (0x88) disabled
# bounds: x1=27 y1=210 x2=490 y2=228
# text: "windows. This ensures the same ordering when the set is launched."
# item 16: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27047.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=306 y2=37
# text: "Ways to Invoke Save Sets… (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=68
# text: " • Hold the option key while selecting a set from the Sets Menu."
# item 12: TEXT (0x88) disabled
# bounds: x1=27 y1=77 x2=490 y2=127
# text: "In this case the Save Sets… dialog will open with the selected set. The File List will open at the folder containing the first application in that set, and the \"Show Documents\" radio button will be on."
# item 13: TEXT (0x88) disabled
# bounds: x1=27 y1=137 x2=491 y2=187
# text: "This method of invoking Save Sets… enables you to verify that you\'re launching the right set. Clicking \"Done\" while that set is showing results in its being launched. However, you are not restricted from"
# item 14: TEXT (0x88) disabled
# bounds: x1=27 y1=186 x2=490 y2=236
# text: "further manipulating the dialog. If you choose to do that, be aware that the last set listed in the Set Name text area will be launched. If that happens to have been an Empty or New Set, no launch will occur."
# item 15: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27048.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=306 y2=37
# text: "Ways to Invoke Save Sets… (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=68
# text: " • Click the \"Save Set\" checkbox on a Launch/Open dialog."
# item 12: TEXT (0x88) disabled
# bounds: x1=27 y1=77 x2=490 y2=127
# text: "In this case the Save Sets… dialog will open with a New Set consisting of the application and documents you selected during the Launch/Open dialog. The File List will open at the folder last shown"
# item 13: TEXT (0x88) disabled
# bounds: x1=27 y1=126 x2=490 y2=144
# text: "in that dialog, and the \"Show Documents\" radio button will be on."
# text: "This section describes how you can use the various buttons on the Save Sets… dialog to show/select applications, documents and files that you may want to include in your sets."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=109 x2=490 y2=159
# text: "This scrollable list on the left side of the dialog is used in the same way you would use an application\'s Open Dialog. The volume or folder name is shown above the list, and the \"Eject\" and \"Drive\" buttons are active"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=158 x2=490 y2=192
# text: "when applicable. The pointers (<< or >>) on certain buttons indicate the list (left or right, respectively) to which those buttons pertain."
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=202 x2=492 y2=252
# text: "The set of three radio buttons below the file list pertain only to that list. They indicate the kinds of files being listed there. You may want to take another look at the Save Sets… dialog now. Click \"Done\" to return here."
# item 15: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27050.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=276 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=291 y2=37
# text: "Manipulating the File List (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=100
# text: "There are two circumstances in which the choice of radio buttons is made for you: 1) when the dialog becomes visible, HyperSwitch determines what settings are appropriate; and 2) when an Empty Set is showing, any"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=133
# text: "file you select from the file list must be an application, so HyperSwitch selects the \"Show Applications\" radio button and disables the other two."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=143 x2=490 y2=193
# text: "You may change the file list in any way you want without affecting the sets, which are listed on the right side of the dialog. You only affect the content of a set when you click on the \"<< Select\" button or double click a"
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=192 x2=490 y2=226
# text: "file when the \"<< Select\" button is enabled, which causes that file to become part of the set that\'s showing."
# text: "This section describes how you can create a set to launch one application with as many documents attached as you want (subject to available memory). The next section describes how you can create combined sets."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=109 x2=490 y2=126
# text: "There are five (5) steps to creating a set, as follows:"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=136 x2=490 y2=186
# text: "1) Cause an Empty Set to be displayed: If one is not showing, a) click \"Show All Sets,\" b) select the first set in that list (if it\'s a New Set, click \"Remove >>\"), and c) click \"Show Selected Set.\""
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=196 x2=490 y2=230
# text: "2) Select an application: Manipulate the file list until the application you want is showing. Double click that application (or use \"<< Select\")."
# item 15: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27053.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=217 y2=37
# text: "Creating a Set (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=116
# text: "3) Select documents and/or files: HyperSwitch will have set the \"Show Documents\" radio button. If you prefer other files, click on \"Show All Files.\" Then manipulate the file list and double click (or \"<< Select\") each document or file you want."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=125 x2=490 y2=191
# text: "4) Give your New Set a name: With System versions 4.1 thru 6.0.x, just start typing, and the \"Set Name:\" text area will change accordingly. With System 7, either click in the \"Set Name:\" text area or tab to it; then type the name you want."
# text: "This section describes how you can combine sets that you\'ve previously created using the prodecure described in the section \"Creating a Set.\" This allows you to launch several applications with one menu selection."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=109 x2=490 y2=126
# text: "There are four (4) steps to creating a combined set, as follows:"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=136 x2=490 y2=186
# text: "1) Select the sets you want to combine: Click \"Show All Sets.\" Then click or drag over the sets you want until all are highlighted. The \"Combine Sets\" button should now be enabled."
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=196 x2=490 y2=245
# text: "2) Create your combined set: Click \"Combine Sets\" to see the sets you\'ve selected. Use the \"Move >>\" button to position the sets in the order you want them launched."
# item 15: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27055.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=223 y2=37
# text: "Combining Sets (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=99
# text: "4) Give your New Set a name: With System versions 4.1 thru 6.0.x, just start typing, and the \"Set Name:\" text area will change accordingly. With System 7, either click in the \"Set Name:\" text area or tab to it; then type"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=98 x2=490 y2=147
# text: "the name you want. HyperSwitch will automatically prefix all combined set names with an asterisk (*)."
# text: "Clicking this radio button causes HyperSwitch to show applications in the file list."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=110 x2=133 y2=126
# text: "• Show Documents"
# item 14: TEXT (0x88) disabled
# bounds: x1=20 y1=130 x2=490 y2=196
# text: "Clicking this radio button causes HyperSwitch to show documents in the file list. Documents are files identified as having been created by the application showing in the current set list. If no application is showing, the file list will be empty."
# item 15: TEXT (0x88) disabled
# bounds: x1=0 y1=202 x2=107 y2=218
# text: "• Show All files"
# item 16: TEXT (0x88) disabled
# bounds: x1=20 y1=223 x2=491 y2=256
# text: "Clicking this radio button causes HyperSwitch to show all files in the file list. This includes files designated as invisible."
# item 17: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27058.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=244 y2=35
# text: "Button Definitions (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=54 y2=67
# text: "<< Open"
# item 12: TEXT (0x88) disabled
# bounds: x1=20 y1=73 x2=491 y2=123
# text: "This button is enabled only when a folder is highlighted in the file list. Clicking it causes the contents of that folder to be shown. (Double clicking a folder has the same effect.)"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=132 x2=62 y2=148
# text: "<< Select"
# item 14: TEXT (0x88) disabled
# bounds: x1=20 y1=154 x2=490 y2=204
# text: "This button is enabled only when the file currently highlighted in the file list may be included in the set currently showing in the set list. Clicking it causes that file to be added to that set. (Double clicking a"
# item 15: TEXT (0x88) disabled
# bounds: x1=20 y1=203 x2=490 y2=252
# text: "file has the same effect.) If that file is an application, and the \"Show Applications\" button is selected, that application will replace the set\'s current application. (Removable media, like diskettes, are ignored.)"
# item 16: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27059.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=244 y2=35
# text: "Button Definitions (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=59 y2=66
# text: "Move >>"
# item 12: TEXT (0x88) disabled
# bounds: x1=20 y1=72 x2=490 y2=122
# text: "This button is enabled only when a set is highlighted in the list of a combined set. Clicking it causes that set to be rotated downward in the set list. Sets are launched in the order they appear in that list."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=131 x2=72 y2=147
# text: "Remove >>"
# item 14: TEXT (0x88) disabled
# bounds: x1=20 y1=153 x2=490 y2=203
# text: "This button is enabled only when the currently highlighted file(s) or set(s) may be removed from the list in which it appears. Removing a file from a set does not delete that file from your disk. Removing a"
# item 15: TEXT (0x88) disabled
# bounds: x1=20 y1=202 x2=490 y2=251
# text: "set from a combined set does not delete that set from your disk. Removing a set when Showing All Sets deletes that set from your disk and from all combined sets that reference it."
# item 16: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27060.txt
# 18 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=244 y2=35
# text: "Button Definitions (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=152 y2=66
# text: "Remove >> (continued)"
# item 12: TEXT (0x88) disabled
# bounds: x1=20 y1=72 x2=490 y2=122
# text: "Removing a set that is the only element of a combined set causes the combined set to also be removed (when Showing All Sets). Removing an element from a set removes that element from all combined sets"
# item 13: TEXT (0x88) disabled
# bounds: x1=20 y1=121 x2=490 y2=171
# text: "that reference it. You cannot remove the last element of a set, which would result in an Empty Set. You cannot remove an application from a set; use the \"<< Select\" button to replace one application with"
# item 14: TEXT (0x88) disabled
# bounds: x1=20 y1=170 x2=490 y2=188
# text: "another. The \"Remove >>\" button is disabled during \"View Set.\""
# item 15: TEXT (0x88) disabled
# bounds: x1=0 y1=197 x2=108 y2=215
# text: "Show Directory"
# item 16: TEXT (0x88) disabled
# bounds: x1=20 y1=219 x2=490 y2=253
# text: "This button is enabled when a file highlighted in a set list is located in a directory (folder) other than the one being shown in the file list."
# item 17: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27061.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=244 y2=35
# text: "Button Definitions (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=184 y2=68
# text: "Show Directory (continued)"
# item 12: TEXT (0x88) disabled
# bounds: x1=20 y1=72 x2=490 y2=122
# text: "Clicking this button causes the file list to transition to the highlighted file\'s directory. Double clicking a file in a set list has the same effect, which is the only way you can do this during \"View Set.\""
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=130 x2=92 y2=146
# text: "Combine Sets"
# item 14: TEXT (0x88) disabled
# bounds: x1=20 y1=152 x2=490 y2=202
# text: "This button is visible when Showing All Sets. It is enabled when two or more sets are highlighted in the set list, and those sets can be combined. You may not combine an Empty Set, a New Set or a set that"
# item 15: TEXT (0x88) disabled
# bounds: x1=20 y1=201 x2=490 y2=251
# text: "is already a combined set. Clicking this button creates a combined set (New Set) consisting of the sets that were highlighted. Note: there is no HyperSwitch function for adding another set to a combined set."
# item 16: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27062.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=244 y2=35
# text: "Button Definitions (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=63 y2=66
# text: "View Set"
# item 12: TEXT (0x88) disabled
# bounds: x1=20 y1=72 x2=490 y2=122
# text: "This button is made visible when a combined set is showing in the set list. It is enabled when a set within the combined set is highlighted. Clicking \"View Set\" causes the highlighted set to be displayed for"
# item 13: TEXT (0x88) disabled
# bounds: x1=20 y1=121 x2=490 y2=171
# text: "\"viewing\" only. (Double clicking a set name has the same effect.) The name on the \"View Set\" button changes to \"Return.\" Click that button when you want to see the combined set again."
# item 14: TEXT (0x88) disabled
# bounds: x1=20 y1=181 x2=490 y2=231
# text: "You may not make changes to a set that you are \"viewing,\" but you can manipulate the file list. Clicking \"Return\" puts the file list back the way it was when you clicked \"View Set.\" Any other transition, e.g."
# item 15: TEXT (0x88) disabled
# bounds: x1=20 y1=230 x2=490 y2=248
# text: "clicking \"Show All Sets,\" leaves the file list as is."
# item 16: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27063.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=244 y2=35
# text: "Button Definitions (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=49 y2=66
# text: "Return"
# item 12: TEXT (0x88) disabled
# bounds: x1=20 y1=72 x2=490 y2=122
# text: "This button is made visible and enabled when you click \"View Set.\" Clicking it returns the Save Sets… dialog to the condition it was in when you clicked \"View Set.\""
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=132 x2=36 y2=148
# text: "Done"
# item 14: TEXT (0x88) disabled
# bounds: x1=20 y1=155 x2=490 y2=205
# text: "Clicking this button terminates the Save Sets… dialog. If you invoked Save Sets… from a Launch/Open dialog, that function will resume. If you invoked Save Sets… from the Sets Menu, the set last shown in the"
# item 15: TEXT (0x88) disabled
# bounds: x1=20 y1=204 x2=490 y2=254
# text: "\"Set Name\" text area will be launched, unless that was a New/Empty Set. HyperSwitch will warn you if you have a New Set you haven\'t named. Click \"Done\" again to ignore the warning."
# item 16: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27064.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=244 y2=35
# text: "Button Definitions (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=70 y2=68
# text: "Verify Set"
# item 12: TEXT (0x88) disabled
# bounds: x1=20 y1=72 x2=490 y2=122
# text: "This button is made visible and enabled when one set is highlighted while Showing All Sets. Clicking it causes HyperSwitch to verify that it can find all of the files referenced by that set. The set contents will"
# item 13: TEXT (0x88) disabled
# bounds: x1=20 y1=121 x2=490 y2=171
# text: "be shown in the set list during the verify process. If all files can be located, the \"Verify Set\" button will be made invisible for that set. Any files not found will be highlighted for you. You should remove or"
# item 14: TEXT (0x88) disabled
# bounds: x1=20 y1=170 x2=490 y2=187
# text: "replace the references to those files."
# item 15: TEXT (0x88) disabled
# bounds: x1=20 y1=196 x2=490 y2=246
# text: "If you invoked Save Sets… from the Sets Menu, be aware that \"Verify Set\" causes the set name to be shown in the \"Set Name\" text area. The last set shown there is launched when you terminate the dialog."
# item 16: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27065.txt
# 18 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=244 y2=35
# text: "Button Definitions (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=141 y2=68
# text: "Cancel Name Change"
# item 12: TEXT (0x88) disabled
# bounds: x1=20 y1=71 x2=490 y2=121
# text: "This button is made visible and enabled whenever you modify the \"Set Name\" text area. Clicking it restores the set name to what it was before you started typing."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=126 x2=140 y2=142
# text: "• Show Selected Set"
# item 14: TEXT (0x88) disabled
# bounds: x1=20 y1=146 x2=490 y2=196
# text: "This radio button is active when Showing All Sets. Clicking it causes the highlighted set to be displayed. (Double clicking a set name has the same effect.)"
# item 15: TEXT (0x88) disabled
# bounds: x1=0 y1=201 x2=108 y2=217
# text: "• Show All Sets"
# item 16: TEXT (0x88) disabled
# bounds: x1=20 y1=221 x2=491 y2=255
# text: "Clicking this radio button causes HyperSwitch to display a list of all the sets you\'ve created."
# item 17: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27066.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=275 y2=20
# text: "Options Menu - Save Sets… (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=244 y2=35
# text: "Button Definitions (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=47 y2=68
# text: "Toggle"
# item 12: TEXT (0x88) disabled
# bounds: x1=20 y1=71 x2=490 y2=121
# text: "This button is enabled whenever the \"Set Name\" text area has a valid set name (i.e. other than Empty Set or New Set). Clicking this button shortens the time needed to start creation of another set."
# text: "The only functional differences between a Launch… dialog and an Open… dialog are the functions they perform \"after\" you end the dialogs. The only way to tell the difference between the two dialogs is to look at the"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=490 y2=139
# text: "button immediately above the \"Cancel\" button. If it says \"Launch,\" the application (program) you select will be launched. If it says \"Open,\" that application is already in memory, so HyperSwitch will attempt to coerce"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=138 x2=490 y2=188
# text: "the application into opening any documents you select. The same dialog can even alternate between Launch… and Open… as you manipulate it. For these reasons, both types of dialogs are described in this section."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=199 x2=490 y2=249
# text: "There is one other difference between the two dialogs, that being the ways they can be invoked. So the following index panel treats that issue separately for each type of dialog."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27070.txt
# 34 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "11"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=224 y2=21
# text: "Launch/Open Dialog (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=10 y1=224 x2=137 y2=242
# text: "*Click on any topic"
# item 11: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 12: TEXT (0x08) enabled
# bounds: x1=60 y1=52 x2=231 y2=69
# text: "Ways to Invoke Launch…"
# item 13: TEXT (0x08) enabled
# bounds: x1=60 y1=84 x2=218 y2=101
# text: "Ways to Invoke Open…"
# item 14: TEXT (0x08) enabled
# bounds: x1=60 y1=118 x2=199 y2=135
# text: "• Show Applications"
# item 15: TEXT (0x08) enabled
# bounds: x1=60 y1=150 x2=191 y2=167
# text: "• Show Documents"
# item 16: TEXT (0x08) enabled
# bounds: x1=60 y1=182 x2=166 y2=199
# text: "Using the Icons"
# item 17: TEXT (0x08) enabled
# bounds: x1=290 y1=52 x2=384 y2=69
# text: "Select Button"
# item 18: TEXT (0x08) enabled
# bounds: x1=290 y1=84 x2=428 y2=101
# text: "Launch/Open Button"
# item 19: TEXT (0x08) enabled
# bounds: x1=290 y1=118 x2=387 y2=135
# text: "Cancel Button"
# item 20: TEXT (0x08) enabled
# bounds: x1=290 y1=150 x2=427 y2=167
# text: "Print Only Checkbox"
# item 21: TEXT (0x08) enabled
# bounds: x1=290 y1=182 x2=388 y2=199
# text: "Quit Checkbox"
# item 22: TEXT (0x08) enabled
# bounds: x1=290 y1=214 x2=419 y2=231
# text: "Save Set Checkbox"
# item 23: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27071"
# item 24: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27073"
# item 25: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27077"
# item 26: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27078"
# item 27: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27079"
# item 28: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27082"
# item 29: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27083"
# item 30: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27085"
# item 31: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27086"
# item 32: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27087"
# item 33: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27088"
DITL_27071.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=223 y2=20
# text: "Launch/Open Dialog (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=212 y2=37
# text: "Ways to Invoke Launch…"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=68
# text: "There are three (3) ways to invoke the Launch… dialog, as follows:"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=79 x2=279 y2=97
# text: " • Select Launch… from the main menu."
# item 13: TEXT (0x88) disabled
# bounds: x1=27 y1=103 x2=490 y2=169
# text: "When the dialog opens, \"Show Applications\" will have been set, and the initial directory (folder) will have been decided by the frontmost (active) application, which usually means the last folder you saw in that application\'s Open dialog."
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=181 x2=472 y2=199
# text: " • Press the letter \"L\" while holding the command (⌘) and shift keys."
# item 15: TEXT (0x88) disabled
# bounds: x1=27 y1=206 x2=490 y2=255
# text: "When the dialog opens, \"Show Applications\" will have been set, and the initial directory (folder) will have been set to the one containing the frontmost (active) application."
# item 16: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27072.txt
# 19 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=223 y2=20
# text: "Launch/Open Dialog (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=291 y2=37
# text: "Ways to Invoke Launch… (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=27 y1=50 x2=490 y2=85
# text: "Select an application from the bottom portion of the Applications Menu, while holding down the option key."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=26 y2=64
# text: " •"
# item 13: TEXT (0x88) disabled
# bounds: x1=27 y1=96 x2=490 y2=146
# text: "When the dialog opens, \"Show Documents\" will have been set, the initial directory (folder) will have been set to the one containing the application you selected, and that application\'s icon will have been"
# item 14: TEXT (0x88) disabled
# bounds: x1=27 y1=145 x2=490 y2=179
# text: "inverted. Only documents identified as having been created by that application will be shown in the file list."
# text: "There are three (3) ways to invoke the Open… dialog, as follows:"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=79 x2=279 y2=97
# text: " • Select Open… from the main menu."
# item 13: TEXT (0x88) disabled
# bounds: x1=27 y1=103 x2=490 y2=153
# text: "When the dialog opens, \"Show Documents\" will have been set, the initial directory (folder) will have been set to the one containing the frontmost (active) application, and that application\'s icon will have"
# item 14: TEXT (0x88) disabled
# bounds: x1=27 y1=152 x2=490 y2=186
# text: "been inverted, i.e. only documents identified as having been created by that application will be shown in the file list."
# item 15: TEXT (0x88) disabled
# bounds: x1=27 y1=194 x2=490 y2=228
# text: "To learn more about using a dialog\'s icons to restrict the file list, click the following phrase."
# item 16: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
# item 17: TEXT (0x08) enabled
# bounds: x1=167 y1=231 x2=338 y2=249
# text: "Review \"Using the Icons\""
# item 18: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27079"
DITL_27074.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=223 y2=20
# text: "Launch/Open Dialog (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=280 y2=37
# text: "Ways to Invoke Open… (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=68
# text: " • Press the letter \"O\" while holding the command (⌘) and shift keys."
# item 12: TEXT (0x88) disabled
# bounds: x1=27 y1=75 x2=490 y2=125
# text: "When the dialog opens, \"Show Documents\" will have been set. The initial directory (folder) will have been decided in one of the following ways:"
# item 13: TEXT (0x88) disabled
# bounds: x1=40 y1=132 x2=490 y2=196
# text: "1) if the frontmost (active) window represents a currently-open file, the folder containing that file will be shown, and the document icon will be inverted, i.e. only files of the same type as shown in that window will be shown in the file list; otherwise"
# item 14: TEXT (0x88) disabled
# bounds: x1=40 y1=204 x2=490 y2=254
# text: "2) the folder containing the frontmost (active) application will be shown, and the application icon will be inverted, i.e. only files created by that application will be shown in the file list."
# item 15: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27075.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=223 y2=20
# text: "Launch/Open Dialog (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=280 y2=37
# text: "Ways to Invoke Open… (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=68
# text: " • Click the mouse while holding the command (⌘), shift and option keys."
# item 12: TEXT (0x88) disabled
# bounds: x1=27 y1=75 x2=490 y2=125
# text: "When you invoke the Open… dialog in this way, you should click on one of the frontmost application\'s windows; one that corresponds to the location and/or type of file you want to open. When you do that,"
# item 13: TEXT (0x88) disabled
# bounds: x1=27 y1=124 x2=490 y2=174
# text: "HyperSwitch will display its Open… dialog at the folder containing the file represented by that window. It will also restrict the file list to only files of that same type."
# item 14: TEXT (0x88) disabled
# bounds: x1=27 y1=183 x2=490 y2=249
# text: "HyperSwitch may not find the file associated with the window you clicked. The file must currently be open, or it must be located in the same folder as the frontmost (active) application. (Continued on the next panel.)"
# item 15: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27076.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=223 y2=20
# text: "Launch/Open Dialog (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=280 y2=37
# text: "Ways to Invoke Open… (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=27 y1=50 x2=490 y2=100
# text: "If HyperSwitch can\'t find the file associated with the window you clicked, it will try the frontmost application\'s other windows (those layered below the one you clicked). If no associated file is found,"
# item 12: TEXT (0x88) disabled
# bounds: x1=27 y1=99 x2=490 y2=133
# text: "the initial directory will be set to the one containing the frontmost application, and only files created by that application will be shown."
# item 13: TEXT (0x88) disabled
# bounds: x1=27 y1=142 x2=490 y2=192
# text: "When the dialog opens, \"Show Documents\" will have been set, and the initial directory (folder) will have been decided in one of the ways described, above. If a file was found, the document icon will"
# text: "Clicking on this radio button causes HyperSwitch to restrict the file list to only those files that appear to be applications (folders are always shown). In order to be listed, such files must conform to the following:"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=105 x2=490 y2=123
# text: " • Finder file type must be \"APPL\";"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=128 x2=490 y2=145
# text: " • must not be a temporary file (i.e. the signature cannot be null); and"
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=150 x2=490 y2=168
# text: " • the file must not be designated as invisible."
# text: "Clicking on this radio button causes HyperSwitch to restrict the file list to only those files that appear to be documents (folders are always shown). In order to be listed, such files must conform to the following:"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=103 x2=490 y2=121
# text: " • the file must not be an application, a system file or an INIT;"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=126 x2=490 y2=143
# text: " • must not be a temporary file (i.e. the signature cannot be null);"
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=148 x2=490 y2=166
# text: " • the file must not be designated as invisible; and"
# item 15: TEXT (0x88) disabled
# bounds: x1=0 y1=172 x2=490 y2=190
# text: " • the file must not have a bundle resource."
# item 16: TEXT (0x88) disabled
# bounds: x1=0 y1=197 x2=490 y2=246
# text: "The intent of this selection process is to ensure that only files identified as having been created by an application are included in the file list. If you are executing under MultiFinder, Switcher sets will not be shown in"
# text: "Two icons can appear in the lower-left corner of a Launch/Open dialog. The leftmost icon represents a document while the adjacent icon represents an application. The name of the application appears to the"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=149
# text: "right of its icon. It\'s important to note that this application is the one HyperSwitch will launch (or cause to open documents) when you click the \"Launch/Open\" button."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=157 x2=490 y2=207
# text: "Both of these icons can be used to restrict the file list. When you click an icon, HyperSwitch inverts it, that is, the icon becomes darker. Clicking an inverted icon returns it to normal. An inverted application icon restricts"
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=206 x2=490 y2=240
# text: "the file list to documents created by that application, while an inverted document icon restricts the file list to documents of that same type."
# item 15: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27080.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=223 y2=20
# text: "Launch/Open Dialog (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=223 y2=37
# text: "Using the Icons (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=491 y2=100
# text: "When a document is highlighted in the file list, HyperSwitch displays its icon along with the icon and name of the application that created it. When locating an application, HyperSwitch first looks at the disk that\'s"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=149
# text: "being shown in the file list. If it doesn\'t find the application there, it searches all other disk drives, including network drives. If HyperSwitch can\'t find the application that created the highlighted document, it shows"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=148 x2=490 y2=166
# text: "\"Application not present\" where the application\'s name would have been."
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=175 x2=490 y2=224
# text: "If you have multiple versions of the same application, and you want a particular version to be launched, you should find and highlight that version in the file list, and then invert its application icon. As long as"
# item 15: TEXT (0x88) disabled
# bounds: x1=0 y1=223 x2=490 y2=255
# text: "that icon remains inverted while you select the documents you want to open, that application will be the one launched."
# item 16: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27081.txt
# 14 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=223 y2=20
# text: "Launch/Open Dialog (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=223 y2=37
# text: "Using the Icons (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=100
# text: "You can also pick the version you want to launch after selecting all the documents you want to open. You must click \"Show Applications\" after you choose your documents and before you highlight the application you"
# text: "The Select button is enabled when a document is highlighted in the file list, and that document has not already been selected. You may use this button to select up to 15 documents to be opened by an application. The"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=133
# text: "number of documents you\'ve selected is shown in the upper-right corner of the dialog."
# text: "The title of this button indicates whether the application you\'ve selected is already in memory or must be launched. Clicking this button ends the dialog and causes HyperSwitch to take the designated action."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=108 x2=490 y2=174
# text: "If the title is \"Open,\" the application is in memory, so HyperSwitch will attempt to coerce it into opening the documents you\'ve selected. You should select only those kinds of documents that would ordinarily appear in the application\'s own Open dialog."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=183 x2=490 y2=247
# text: "If the title is \"Launch,\" HyperSwitch will launch the application and attach the documents you\'ve selected. You may select any documents you choose. The launched application will decide whether or not to open them."
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27084.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=223 y2=20
# text: "Launch/Open Dialog (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=19 x2=256 y2=37
# text: "Launch/Open Button (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=492 y2=115
# text: "Double clicking an application or document in the file list has the same effect as clicking the Launch/Open button. Clicking the Lauch/Open button when a document is highlighted in the file list also causes that document to be selected."
# text: "The Quit checkbox always lists the name of the frontmost (active) application. If this box is checked, HyperSwitch will quit that application when you end the dialog by any means other than the Cancel button."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=107 x2=490 y2=157
# text: "When you select a document(s) for an application that is currently in memory, HyperSwitch assumes you want that application to open that document(s). If, instead, you want to re-launch an application, invoke"
# text: "If this box is checked, when you end the dialog by any means other than the Cancel button, HyperSwitch will invoke the Save Sets… dialog prior to executing the Launch or Open you\'ve requested."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=108 x2=490 y2=158
# text: "When the Save Sets… dialog opens, the file list will be set to the same directory (folder) as when you ended the Launch/Open dialog. A New Set will be showing, which consists of the application and any documents you"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=157 x2=490 y2=207
# text: "selected during the Launch/Open dialog. You may name this set, which saves it for future selection from the Sets Menu. You may also modify the set, which will not change the effect of the Launch/Open dialog."
# text: "This menu item is not applicable to a single-application environment, so it only shows in the menu when you\'re executing MultiFinder or Switcher. If you\'re executing MultiFinder, please review the following two topics before selecting Quit Finder."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=164 x2=490 y2=214
# text: "Selecting this menu item causes HyperSwitch to quit Finder, which frees up the memory Finder occupies. Finder performs many useful functions, so you should only do this when you have memory constraints."
# text: "HyperSwitch attempts to inform you when it encounters a problem. If you are using system software earlier than version 6.0, you may only hear a beep when a problem occurs. There are two reasons for this:"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=94 x2=31 y2=111
# text: " 1."
# item 12: TEXT (0x88) disabled
# bounds: x1=40 y1=94 x2=491 y2=144
# text: "The problem itself may prevent HyperSwitch from displaying a message. This could be because the problem is a lack of memory, or because HyperSwitch can\'t open a file that contains its message."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=150 x2=31 y2=167
# text: " 2."
# item 14: TEXT (0x88) disabled
# bounds: x1=40 y1=150 x2=490 y2=200
# text: "System software version 6.0 introduced a means for programs such as HyperSwitch to display messages in a way that is less likely to compound the problem being reported, and HyperSwitch uses this."
# item 15: TEXT (0x88) disabled
# bounds: x1=0 y1=207 x2=490 y2=240
# text: "If you are using system software earlier than 6.0, perhaps you can get some insight into why HyperSwitch may be beeping at you by reviewing"
# item 16: TEXT (0x88) disabled
# bounds: x1=0 y1=239 x2=177 y2=256
# text: "the following Help Panels."
DITL_27093.txt
# 31 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "10"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=230 y2=21
# text: "Beeps and Messages (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=10 y1=224 x2=162 y2=242
# text: "*Click on any message"
# item 11: TEXT (0x08) enabled
# bounds: x1=60 y1=52 x2=213 y2=69
# text: "Can\'t Allocate Memory"
# item 12: TEXT (0x08) enabled
# bounds: x1=60 y1=84 x2=218 y2=101
# text: "Can\'t Open Preferences"
# item 13: TEXT (0x08) enabled
# bounds: x1=60 y1=118 x2=194 y2=135
# text: "Can\'t Open Help File"
# item 14: TEXT (0x08) enabled
# bounds: x1=60 y1=150 x2=206 y2=167
# text: "Can\'t Find Application"
# item 15: TEXT (0x08) enabled
# bounds: x1=60 y1=182 x2=225 y2=199
# text: "Can\'t Launch Application"
# item 16: TEXT (0x08) enabled
# bounds: x1=290 y1=52 x2=435 y2=69
# text: "Can\'t Quit Application"
# item 17: TEXT (0x08) enabled
# bounds: x1=290 y1=84 x2=439 y2=101
# text: "Can\'t Open Documents"
# item 18: TEXT (0x08) enabled
# bounds: x1=290 y1=118 x2=438 y2=135
# text: "Error Processing a Set"
# item 19: TEXT (0x08) enabled
# bounds: x1=290 y1=150 x2=453 y2=167
# text: "Can\'t Transfer Clipboard"
# item 20: TEXT (0x88) disabled
# bounds: x1=290 y1=182 x2=388 y2=199
# text: ""
# item 21: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27094"
# item 22: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27096"
# item 23: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27097"
# item 24: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27098"
# item 25: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27099"
# item 26: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27100"
# item 27: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27101"
# item 28: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27102"
# item 29: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27103"
# item 30: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27000"
DITL_27094.txt
# 19 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=230 y2=21
# text: "Beeps and Messages (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=90 y1=42 x2=404 y2=75
# text: "HyperSwitch‚Ñ¢ can\'t allocate sufficient memory to perform the requested function."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=84 x2=490 y2=134
# text: "This message may apply in any number of situations. If you\'ve asked for a dialog of some kind, HyperSwitch may be advising you that the dialog requires more memory than can be allocated. Before showing any dialog,"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=133 x2=490 y2=182
# text: "HyperSwitch will have estimated its memory requirement and checked to see if the dialog can be shown. Generally, memory for dialogs must be available within the space assigned to an application. So having memory"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=181 x2=490 y2=199
# text: "available \"somewhere\" may not be sufficient."
# item 14: BUTTON (0x84) disabled
# bounds: x1=88 y1=40 x2=406 y2=41
# text: ""
# item 15: BUTTON (0x84) disabled
# bounds: x1=88 y1=40 x2=89 y2=76
# text: ""
# item 16: BUTTON (0x84) disabled
# bounds: x1=88 y1=76 x2=406 y2=77
# text: ""
# item 17: BUTTON (0x84) disabled
# bounds: x1=405 y1=40 x2=406 y2=77
# text: ""
# item 18: TEXT (0x88) disabled
# bounds: x1=0 y1=204 x2=490 y2=253
# text: "In certain circumstances, the inability to allocate memory can result in a system error and the need to restart your Macintosh. HyperSwitch tries to intercept these system errors when particular dialogs are showing."
DITL_27095.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27122"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=230 y2=21
# text: "Beeps and Messages (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=90
# text: "HyperSwitch tries to intercept system errors that indicate a memory allocation problem during its processing of Launch/Open dialogs and Save Sets… dialogs. When it intercepts such a system error, HyperSwitch will"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=89 x2=491 y2=139
# text: "cause your system to beep 3 times (regardless of which system software version you\'re using). It will then attempt to return your system, as nearly as possible, to the condition it was in at the time you requested"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=138 x2=490 y2=188
# text: "the problem dialog. However, this is not a precise activity, and your system may be in some disarray, even though it appears to be normal. You should immediately \"quit\" the offended application. You should"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=187 x2=490 y2=205
# text: "restart your system, if any unusual conditions persist."
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=213 x2=490 y2=246
# text: "If you use a low-level debugger, it may trap out a system error, which would keep HyperSwitch from seeing it."
DITL_27096.txt
# 18 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27122"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=230 y2=21
# text: "Beeps and Messages (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=90 y1=42 x2=404 y2=75
# text: "HyperSwitch‚Ñ¢ can\'t open its Preferences File."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=84 x2=490 y2=150
# text: "The file called \"HyperSwitch‚Ñ¢ Preferences\" should be in a folder called \"Preferences\" within your System Folder. This message indicates that either the file isn\'t there, or there isn\'t enough memory available to open it for processing."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=158 x2=490 y2=208
# text: "If you have applications that cause switch launches, or if you invoke them yourself, you must ensure that each System Folder you switch to has a HyperSwitch‚Ñ¢ Preferences file."
# text: "HyperSwitch‚Ñ¢ can\'t open its Help File."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=84 x2=489 y2=134
# text: "The file called \"HyperSwitch‚Ñ¢ Help\" should be in your System Folder. This message indicates that either the file isn\'t there, or there isn\'t enough memory available to open it for processing."
# text: "HyperSwitch‚Ñ¢ can\'t find the application: XYZ\nDo you want to look for it?"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=84 x2=489 y2=134
# text: "HyperSwitch saves the names and locations of your applications in its Preferences file. This message suggests that its information about the specified application (XYZ) may be stale. It would have followed your"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=133 x2=489 y2=151
# text: "selection of an item from either the Applications Menu or the Sets Menu. "
# item 13: BUTTON (0x84) disabled
# bounds: x1=88 y1=40 x2=406 y2=41
# text: ""
# item 14: BUTTON (0x84) disabled
# bounds: x1=88 y1=40 x2=89 y2=76
# text: ""
# item 15: BUTTON (0x84) disabled
# bounds: x1=88 y1=76 x2=406 y2=77
# text: ""
# item 16: BUTTON (0x84) disabled
# bounds: x1=405 y1=40 x2=406 y2=77
# text: ""
# item 17: TEXT (0x88) disabled
# bounds: x1=0 y1=158 x2=490 y2=192
# text: "If from the Applications Menu: HyperSwitch has deleted \"XYZ\" application from that menu. Clicking the \"Yes\" button invokes a Launch dialog."
# text: "HyperSwitch‚Ñ¢ can\'t launch the requested application."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=84 x2=490 y2=118
# text: "This message generally means there isn\'t enough memory available to accommodate a particular application."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=126 x2=490 y2=176
# text: "When MultiFinder is executing, before initiating the launch, HyperSwitch will check to see if the amount of memory an application needs is available. When Switcher is executing, Switcher takes care of that."
# text: "HyperSwitch‚Ñ¢ can\'t quit this application. Please do so manually."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=84 x2=490 y2=134
# text: "This message generally means that the application is in a \"mode\" that must be completed before it can accept a Quit menu command. It\'s also possible that the application doesn\'t conform to Macintosh standards."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=142 x2=490 y2=192
# text: "HyperSwitch tries a variety of methods to convince an application that its Quit menu command has been selected. If no method works, you get a message such as this."
# text: "HyperSwitch‚Ñ¢ can\'t open some or all of the requested documents."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=84 x2=490 y2=134
# text: "This message means that HyperSwitch can not coerce the application into opening the document(s) or file(s) you\'ve specified. It\'s also possible that the application doesn\'t conform to Macintosh standards."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=142 x2=490 y2=192
# text: "HyperSwitch tries a variety of methods to convince an application that its Open… menu command has been selected. If no method works, or if a document is not recognized by the application, you get this message."
# text: "HyperSwitch‚Ñ¢ encountered an error during processing of the requested set."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=84 x2=490 y2=134
# text: "This message generally means that HyperSwitch couldn\'t allocate enough memory to read the set from the Preferences file. It may also indicate that the set information has been damaged in some way."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=142 x2=490 y2=192
# text: "This message can only occur after you\'ve made a selection from the Sets Menu. If it\'s a memory problem, you may be able to overcome that by switching to another application and making that selection again."
# text: "HyperSwitch‚Ñ¢ can\'t transfer clipboard contents to the launched application."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=84 x2=490 y2=134
# text: "Some older versions of applications were not designed to operate in a multi-application environment, such as that provided by MultiFinder and Switcher. During a launch sequence, HyperSwitch must coerce such an"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=133 x2=490 y2=198
# text: "application into placing whatever text or pictures you\'ve cut or copied into a structure called the Clipboard. This is where the launched application is going to look for it. This message implies that the coercion was not successful."
# text: "To a great extent HyperSwitch can do what it does because of Macintosh user interface standards, and because most software developers follow prescribed internal processes that accommodate those standards. But,"
# text: "Edward E. McFee\nP.O. Box 55023\nAtlanta, GA 30308-5023\nUSA"
DITL_27106.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=212 y2=21
# text: "Technical Insights (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=20 x2=142 y2=37
# text: "Quitting Finder"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=100
# text: "The HyperSwitch main menu contains two items that are present only when you\'re executing MultiFinder or Switcher. These are \"Quit Finder\" and \"Launch Finder.\" With Switcher, these functions are just included for"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=133
# text: "your convenience, since you can already launch and quit Finder without HyperSwitch."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=140 x2=490 y2=190
# text: "However, MultiFinder doesn\'t provide a means to quit Finder, because, unlike Switcher, MultiFinder never becomes the frontmost (active) application. Since you always have to have one of those, Proxy‚Ñ¢, the"
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=189 x2=490 y2=239
# text: "application that comes with HyperSwitch, serves as a \"placeholder\" for those times when no other application would be frontmost. To learn more about Proxy, click the following phrase."
# item 15: TEXT (0x08) enabled
# bounds: x1=169 y1=240 x2=329 y2=258
# text: "Review \"About Proxy‚Ñ¢\""
# item 16: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27014"
DITL_27107.txt
# 14 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27123"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=212 y2=21
# text: "Technical Insights (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=20 x2=221 y2=37
# text: "Quitting Finder (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=100
# text: "So when would there be no other frontmost application? When you\'ve quit Finder, you\'re executing only one application, and you tell it to quit. When you quit the only application that\'s executing, MultiFinder has to"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=149
# text: "launch another one, and it always chooses Finder (more accurately, it chooses whatever is in the global variable FinderName, but that\'s Finder for purposes of this discussion)."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=154 x2=490 y2=220
# text: "There\'s only one drawback to this process: MultiFinder wants to launch Finder before it frees up the last application\'s memory. If there isn\'t enough memory to do that, you get a system error and the opportunity to restart your Macintosh."
DITL_27108.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27123"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=212 y2=21
# text: "Technical Insights (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=20 x2=159 y2=38
# text: "Switch Launching"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=100
# text: "A switch launch is a transition from one System file to another. Some applications force a switch launch to occur. You can invoke a switch launch from Finder by double clicking a System file while you hold the"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=149
# text: "command (‚åò) and option keys. There are some restrictions on this. For example, you aren\'t allowed to switch launch to an earlier version of system software. Switch launching goes away with System 7."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=157 x2=490 y2=207
# text: "HyperSwitch knows when a switch launch occurs, and it changes its internal pointers to your System Folder coincident with that transition. So when you next invoke a function that needs to access its Preferences"
# text: "Whenever you pull down a menu, the system software saves the screen information (bits) before the menu is drawn on the screen. It redraws that saved information when you release the menu. The larger the menu,"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=117
# text: "the more memory it takes to save those bits of information."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=125 x2=490 y2=175
# text: "So what happens when there isn\'t enough memory available to save the screen bits before drawing a menu? The menu gets drawn, but when it goes away, an unsightly mess of bits is drawn in its place. It looks like"
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=174 x2=490 y2=224
# text: "something very bad has happened to your system, but that isn\'t the case. All you have to do to clean up the mess is move some windows over it. The applications will redraw those windows, and the mess is gone."
DITL_27110.txt
# 13 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=212 y2=21
# text: "Technical Insights (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=20 x2=262 y2=38
# text: "Unsightly Screen Bits (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=100
# text: "Since HyperSwitch\'s menus can become rather large, particularly the one that lists all the names of your windows, you can see this occur when an application has very little free memory. Give the application a little more"
# text: "DiskTop: It has been reported that HyperSwitch and DiskTop are not compatible. However, testing with DiskTop 4.0 showed no compatibility problems. Perhaps there\'s only a problem with prior versions."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=98 x2=490 y2=148
# text: "\n DiskTop is a trademark of CE Software, Inc."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=147 x2=490 y2=197
# text: "400K diskettes: HyperSwitch does not process MFS-formatted diskettes properly when executing a Launch/Open… dialog. It doesn\'t locate an application\'s FREF resource, which prevents its finding the application\'s"
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=196 x2=490 y2=245
# text: "icons and recognizing its documents. This problem does not occur when the application\'s FREF resource can be found on another disk (e.g., an HFS-formatted disk, diskette or CD). This doesn\'t cause a system error, or"
DITL_27112.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27124"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=212 y2=21
# text: "Technical Insights (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=40 y1=20 x2=184 y2=38
# text: "System 7 (continued)"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=50 x2=490 y2=86
# text: "any other serious problem. This should be fixed in the next release."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=85 x2=490 y2=137
# text: "Directory Assistance II: This product impairs the functioning of HyperSwitch during its Save Sets… dialog. The next release will override DA II. In the meantime, here are a couple of workarounds:"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=141 x2=490 y2=176
# text: " 1. If you have Proxy™ loaded, you can do the Save Sets… dialog there. Proxy doesn\'t provide enough memory for DA II to function."
# item 14: TEXT (0x88) disabled
# bounds: x1=0 y1=181 x2=490 y2=247
# text: " 2. You can disable the function of DA II during a specific application and do the Save Sets… dialog within that application. This is not a good choice, since the application is permanently disabled (unless you trash DA II\'s preferences file)."
DITL_27113.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27124"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "0"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=137 y1=3 x2=365 y2=21
# text: "HyperSwitch‚Ñ¢ License Agreement"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=104
# text: "HyperSwitch‚Ñ¢ is a proprietary product of Edward E. McFee (AUTHOR) and is protected by copyright law. AUTHOR retains title to and ownership of HyperSwitch‚Ñ¢. You are licensed to use HyperSwitch‚Ñ¢ on the following terms and conditions:"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=112 x2=28 y2=132
# text: " 1."
# item 12: TEXT (0x88) disabled
# bounds: x1=30 y1=112 x2=490 y2=162
# text: "You may use HyperSwitch‚Ñ¢ on as many computers as you like, and you may give HyperSwitch‚Ñ¢ to your friends, who may enjoy these same priviledges."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=170 x2=28 y2=190
# text: " 2."
# item 14: TEXT (0x88) disabled
# bounds: x1=30 y1=170 x2=490 y2=234
# text: "You may not sell, rent, lease or otherwise distribute HyperSwitch‚Ñ¢ for profit without written consent of AUTHOR. However, you may distribute HyperSwitch‚Ñ¢, as freeware, via public or private bulletin board services."
# text: "You may not decompile, disassemble, reverse engineer, create derivative works or in any way modify the program code without prior written consent of AUTHOR."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=104 x2=490 y2=154
# text: "In no event will AUTHOR be liable to you for damages, including any loss of profits, lost savings, or other incidental or consequential damages arising out of your use of HyperSwitch‚Ñ¢, even if AUTHOR has been advised"
# text: "HyperSwitch‚Ñ¢ 1.1 is compatible with System 7. One menu name is changed when running under System 7: the DAs Menu becomes the Apples Menu, and it contains all items placed in the Apple Menu Items folder."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=88 x2=490 y2=137
# text: "The section titled \"Menus and Dialogs\" (which you can get to via the Index Panel) contains information about how selections from the Apples Menu are handled."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=136 x2=490 y2=185
# text: "\nAs you read these Help Panels, references to MultiFinder should be considered synonymous to references to System 7. Also, System 7 now"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=184 x2=490 y2=233
# text: "shows disk volumes as well as folders in dialogs that display a file list. Whenever a help panel refers to folders in such a list, you can assume it also refers to disk volumes."
DITL_27118.txt
# 14 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27117"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27104"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=195 y2=20
# text: "About System 7 (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=89
# text: "HyperSwitch‚Ñ¢ 1.1 doesn\'t take advantage of System 7\'s alias feature. Application and set references are stored in the HyperSwitch Preferences file as their points of origin, even when you select an aliased file during a"
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=88 x2=490 y2=137
# text: "HyperSwitch dialog (e.g., during Save Sets…). If you move an application or file to another folder, HyperSwitch still won\'t find it. Perhaps we can remedy this in the next version."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=136 x2=490 y2=185
# text: "\nThis isn\'t to say you can\'t select aliased files during HyperSwitch dialogs. You can. HyperSwitch will resolve aliases and pass the resolved file"
# text: "This panel describes the Apples Menu, which applies to System 7. The DAs Menu, which applies to System versions 4.1 thru 6.0.x, is described on the previous panel."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=88 x2=490 y2=137
# text: "\nHyperSwitch creates the Apples Menu whenever you power-on or restart your Macintosh. It shows the names of all items contained in your Apple"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=136 x2=490 y2=185
# text: "Menu Items folder. If you add or remove items from that folder, you can advise HyperSwitch to update its Apples Menu. You do this by selecting \"Refresh Apples Menu\" from the Options Menu."
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=184 x2=490 y2=233
# text: "\nAs long as Finder is in memory, the Ô£ø Menu shows the same items as the Apples Menu, which makes it just an added convenience. However, when"
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27120.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27119"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27121"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=206 y2=20
# text: "DAs/Apples Menu (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=89
# text: "you quit Finder (e.g., by choosing \"Quit Finder\" from the HyperSwitch main menu), the Ô£ø Menu no longer shows items contained in the Apple Menu Items folder. Then you can rely on the HyperSwitch Apples Menu."
# item 11: TEXT (0x88) disabled
# bounds: x1=0 y1=88 x2=490 y2=137
# text: "\nWhen you select an item from the Apples Menu, HyperSwitch checks to see if Finder is in memory. If it is, HyperSwitch handles the selection the"
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=136 x2=490 y2=185
# text: "same way any application would. However, if Finder isn\'t in memory, HyperSwitch issues the launch commands necessary to cause the DAs and applications to be executed. Also, when Finder isn\'t in memory, if you"
# item 13: TEXT (0x88) disabled
# bounds: x1=0 y1=184 x2=490 y2=233
# text: "select a folder or volume, HyperSwitch will open a Save Sets… dialog positioned at that folder or volume. Holding the Option key when you select an item from the Apples Menu causes HyperSwitch to use its own"
# item 14: PICTURE (0x40) enabled
# bounds: x1=464 y1=4 x2=482 y2=18
# PICT resource ID: 25905
DITL_27121.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=260 x2=470 y2=280
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=340 y1=260 x2=390 y2=280
# text: "Next"
# item 2: BUTTON (0x04) enabled
# bounds: x1=280 y1=260 x2=330 y2=280
# text: "Prev"
# item 3: BUTTON (0x04) enabled
# bounds: x1=220 y1=260 x2=270 y2=280
# text: "Index"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=12 y1=263 x2=189 y2=280
# PICT resource ID: 30100
# item 5: CUSTOM (0x80) disabled
# bounds: x1=410 y1=260 x2=470 y2=280
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27120"
# item 7: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "27026"
# item 8: TEXT (0x88) disabled
# bounds: x1=25000 y1=0 x2=25001 y2=1
# text: "-1"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=3 x2=206 y2=20
# text: "DAs/Apples Menu (continued)"
# item 10: TEXT (0x88) disabled
# bounds: x1=0 y1=40 x2=490 y2=89
# text: "routines as though Finder were not in memory.\n\nSince Finder provides the environment for Control Panels to operate,"
# text: "You want Proxy in memory when you quit Finder, so you won\'t have to quit the last application."
# item 12: TEXT (0x88) disabled
# bounds: x1=0 y1=99 x2=490 y2=149
# text: "With System versions 4.1 thru 6.0.x, quitting Finder releases 160K of memory; 430K with System 7. Obviously, you lose the functions Finder provides as well. HyperSwitch performs some of those functions in"
# text: "Because you have to switch to a different application to use either of these workarounds, the set that HyperSwitch automatically builds for you will be for the application you switch to. You\'ll have to start with an"
